TA15钛合金电子束焊缝形貌及其组织研究

采用不同工艺参数对TA15钛合金进行电子束焊接,通过观察焊缝形貌、测量其形状参数研究了焊接接头形貌的变化规律,并分析了焊接接头组织。结果表明:增大电子束流时,熔深、半熔深熔宽、焊缝宽度都增大,焊缝横截面的形状从"钉形"转变为"钟罩形";增大焊接速度,对焊缝形状影响不大,熔深、半熔深熔宽及焊缝宽度均减小,深宽比先增大后减小;聚焦电流的增大对熔深作用较明显,半熔深熔宽及焊缝宽度变化不大;扫描幅值的增加使焊缝熔深减小,半熔深熔宽增大。靠近母材的热影响区组织与母材组织相近,主要由初生等轴状α相及转变β相组成,并出现针状(α+β);靠近熔合线的组织由α相和针状(α+β)相构成,并出现α'马氏体;熔合区组织由α'组成,熔合线周围柱状晶垂直于焊缝中心生长,并在焊缝中心形成单列或多列的等轴状晶。     

选区熔化过程多尺度多物理场建模研究进展

选区熔化技术是一种基于粉末床的、能够精确成形复杂零件、调控微观组织和性能的金属增材制造技术,其成形过程的计算机模拟对于生产实践具有重要指导意义。综述了国内外的研究现状,首先介绍选区熔化技术的原理及其特点;然后介绍国内外对选区熔化过程已经开展的计算机模拟技术的研究进展;并进一步重点介绍针对电子束选区熔化过程的多尺度多物理场模型,主要包括:(1)微观尺度电子束与材料相互作用的能量吸收模型;(2)细观尺度从铺粉到粉末加热、熔化、流动、沉积成形全过程的模型;(3)宏观尺度零件成形过程模型。     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

Spectroscopic Constraints on Models of Ion-cyclotron Resonance Heating in the Polar Solar Corona

Using empirical velocity distributions derived from UVCS and SUMER ultraviolet spectroscopy, we construct theoretical models of anisotropic ion temperatures in the polar solar corona. The primary energy deposition mechanism we investigate is the dissipation of high frequency (10-10000 Hz) ion-cyclotron resonant Alfvén waves which can heat and accelerate ions differently depending on their charge and mass. We find that it is possible to explain the observed high perpendicular temperatures and strong anisotropies with relatively small amplitudes for the resonant waves. There is suggestive evidence for steepening of the Alfvén wave spectrum between the coronal base and the largest heights observed spectroscopically. Because the ion-cyclotron wave dissipation is rapid, even for minor ions like O⁵⁺, the observed extended heating seems to demand a constantly replenished population of waves over several solar radii. This indicates that the waves are generated gradually throughout the wind rather than propagated up from the base of the corona. This revised version was published online in June 2006 with corrections to the Cover Date.     

刀口法测量高斯光束腰斑大小实验设计

本文设计了利用刀口测量的高斯光束腰斑大小的测量实验装置，并阐述了具体的测量过程。此方法用于μｍ级激光光斑大小测量是可行的，实验装置简单实用。     

离子电推进技术的发展现状与未来

离子电推进是最具代表性和技术成熟度的电推进技术类型之一。本文从放电室技术、离子光学系统技术、放电阴极和中和器阴极技术的优势、缺憾等方面,总结了离子电推进的技术发展现状。针对未来航天任务对离子电推进更大功率、更高比冲、更简系统等新需求,分析了传统离子电推进所面临的主要技术挑战,梳理出了环型离子电推进、双级加速离子电推进、自中和离子电推进、螺旋波放电离子电推进等创新离子电推进技术发展的未来方向。     

EB-PVD制备箔材的厚度均匀性研究

从真空蒸镀中使用的小平面蒸发源理论出发,针对电子束物理气相沉积中为改善箔材厚度分布所须旋转大基板进行蒸镀的情况,建立了该过程的数学模型;并利用该模型对不同的坩埚位置所沉积的箔材厚度进行了定性分析,从而实现了对坩埚与基板相对位置的优化,使基板上沉积的箔材厚度分布可以达到最均匀的状态.最后通过K值的提出使理论和实际箔材厚度的结果趋于一致,即证明所建立的数学模型是合理的.     

新型高温/超高温热障涂层及制备技术研究进展

简单介绍了先进航空发动机高温/超高温热障涂层(TBCs)的研究背景、意义和现状;简述了近年来国际上在新一代超高温TBCs方面的研究进展。重点介绍了近年来北京航空航天大学在新型高温/超高温TBCs方面的研究成果,包括新型超高温、高隔热陶瓷隔热层材料,1 150℃以上新型抗高温氧化金属粘结层材料,以及电子束物理气相沉积(EB-PVD)、等离子体激活EB-PVD(PA EB-PVD)和等离子物理气相沉积(PS-PVD)等新型制备工艺。最后对TBCs在未来高性能航空发动机上的应用及发展趋势进行了展望。     

粘贴压电层功能梯度材料Euler梁热屈曲前自由振动的半解析数值法

研究上下表面粘贴压电层的功能梯度材料Euler梁在升温及电场作用下的振动行为。在精确考虑轴线伸长基础上,建立压电功能梯度Euler层合梁在热-电-机械载荷作用下的几何非线性动力学控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。把问题线性化,利用打靶法,获得在均匀电场和横向非均匀升温场内两端固定和两端简支Euler梁在热屈曲前自由振动特性的半解析数值解。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,梁内仍然会产生拉-弯耦合效应,对梁的自振频率也有一定的影响。     

波束波导馈电系统在深空探测天线应用中的关键技术研究

针对波束波导馈电系统在深空探测天线应用中存在的电小尺寸镜面绕射引起波束波导传输效率降低,不同极化工作时波束指向不一致,以及TE21模跟踪时坐标转换等问题,进行深入研究并给出相应的解决方案或数学模型.通过优化椭球镜M5的曲率,解决了电小尺寸镜面绕射使波束波导传输效率下降问题,使S频段的传输效率提高约4％,35 m天线副反射面的截获效率增加约11％,天线增益提高0.7 dB;给出天线束峰值位置随方位、俯仰角变化的数学模型,提出了中值补偿方法,使天线左右旋极化峰值不一致增益损失减小约0.16 dB,并给出TE21模跟踪时的坐标转换数学模型.这些方法和数学模型已成功应用于实际工程中,并取得了良好的效果.